Home

THE LOAD CELL AND STRAIN GAUGING SPECIALISTS

Load Cells – Standard

A load cell is a transducer that is used to create an electrical signal whose rated capacity is usually directly proportional to the force being measured.

Below are the standard types of load cell that PCM has available to offer. These include compression, tension, bi-directional, shear beam and single point.

PCM also offer ISO 376 rated load cells.

If you would prefer to discuss your load cell application with an engineer whilst studying the website, please do not hesitate to contact us on +44 (0) 1926 864444.

1006 Single Point Load Cell

1006 Single Point Load Cell

  • Capacities 2KG – 5KG.
  • Linearity ±0.02% RO.
  • IP66 rating.

1022 Single Point Load Cell

  • Capacities 3KG – 200KG.
  • Linearity ±0.02% RO.
  • IP66 rating.

1040 Single Point Load Cell

  • Capacities 5KG – 100KG.
  • Linearity ±0.05% RO.
  • IP65 rating.
1250 Single Point Load Cell

1250 Single Point Load Cell

  • Capacities 50KG – 1500KG.
  • Linearity ±0.05% RO.
  • IP65/IP67 rating.
1320 Single Point Load Cell

1320 Single Point Load Cell

  • Capacities 1000KG – 2000KG.
  • Linearity ±0.05% RO.
  • IP66 rating.

BOS Bolt On Sensor

  • Capacity ±500µε.
  • Linearity ±1% RO.
  • IP65 rating.

WFS Weld Force Sensor

  • Built to order.
  • Typical linearity ±1% RO.
  • IP65 rating.

EBS Eye Bolt Sensor

  • Built to order.
  • Typical linearity ±0.25% RO.
  • IP67 rating.

SGBS Strain Gauged Bolt Sensor

  • Built to order.
  • Typical linearity ±0.25% RO.
  • IP65 rating.